 Call Us +86-13902833250
News
Home » News » Common Causes And Solutions of Cracking in Silicone Adhesive

Common Causes And Solutions of Cracking in Silicone Adhesive

Views: 0     Author: Site Editor     Publish Time: 2024-02-23      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
Common Causes And Solutions of Cracking in Silicone Adhesive

Recently, when someone was using silicone sealant to stick things at home, he found that the wall had cracked. This is due to some reasons, such as improper handling of walls, poor quality or improper use of silicone sealant, etc.

微信图片_20240223084416 微信图片_20240223084421 微信图片_20240223084424

When this situation occurs, we should not easily peel off the silicone adhesive, as it may further damage the wall. In this essay, the editor will share with you the causes of glass adhesive cracking and some suggestions for dealing with glass adhesive and wall cracking.


I. The common aspects of silicone adhesive cracking are as follows:


1. Improper construction: Improper construction of silicone adhesive, such as low construction temperature or poor quality, can lead to cracking.

2. External influence: During use, if the glass adhesive is subjected to external impacts or distortions, it may crack.

微信图片_20240223084427

3. Dust pollution: Before injecting the glass adhesive, the base surface must be kept clean. If it is not cleaned thoroughly, the base surface mixed with dust and other pollutants can cause cracks in the glass adhesive.



II. Cracking of glass adhesive can have the following adverse effects on the product:


1. Impact on aesthetics: Cracking can cause the product to lose its aesthetic appeal, affecting the overall experience and selling point.

2. Reduced durability: Cracking will reduce the stability of the glass adhesive to the external environment, thereby reducing its durability.

3. Safety issues: Cracking can increase the instability of the material structure, thereby affecting the safety of users.

微信图片_20240223084431



III. Response measures for cracking of glass adhesive in products:


1. First, remove the affected parts and perform re injection

2. Check and adjust the material and construction temperature of the glass adhesive to avoid cracking.

微信图片_20240223084434

3. Use higher quality glass adhesive materials and construction accessories to ensure that cracking does not occur.



IV. To prevent cracking of glass adhesive:


1. Choose high-quality glass adhesive materials to ensure strong resistance to external impacts and temperature changes.

2. During construction, ensure that the base surface is clean before construction.

3. The sealing material should be evenly applied to ensure that the glass adhesive has no gaps before curing and to avoid cracking.

微信图片_20240223084438

Summary: Handling glass glue and wall cracking requires attention to multiple factors to ensure the effectiveness and safety of construction.


Subscribe Us

Foshan Chuang Shi Ji industrial CO., LTD. was founded in 1993, Accumulated nearly 30 years of development and technical experience.

Products

Quick Links

Contact Us

  +86-757-29203345
 +86-13902833250
No.6 Guangda Industrial Zone, Leliu Town,Shunde Area,Foshan City,Guangdong,China.

Copyright©2022 Foshan Chuang Shi Ji industrial CO., LTD.All Rights Reserved.|Support by Leadong    Sitemap