Views: 0 Author: Site Editor Publish Time: 2024-09-13 Origin: Site
Recently, a fan friend sent a private message to the editor in the background, stating that the newly purchased glass adhesive was not firmly bonded. In fact, the weak bonding of the newly purchased glass adhesive may be caused by various reasons.
Firstly, the bonding effect of glass adhesive is closely related to its quality. If low-quality glass adhesive is used, its bonding effect may be affected, resulting in weak bonding. Therefore, it is recommended to use high-quality glass adhesive to ensure good bonding effect.
Secondly, the bonding effect of glass adhesive is also affected by the construction environment. If the construction surface is not clean and there are grease, dust, or other attachments, the glass adhesive may not be able to bond firmly. Ensuring that the construction surface is clean, free of oil stains and other impurities is the key to ensuring the bonding effect.
Before the construction of glass glue, the surface dust should be cleaned mainly to ensure the construction quality. The presence of dust can affect the bonding effect of glass adhesive, which may lead to problems such as weak bonding, bubbles or cracking. Cleaning the surface dust can improve the adhesion between the glass adhesive and the substrate, ensuring a more beautiful and durable construction effect.
Today, the editor will share with you effective methods for cleaning surface dust before glass glue construction:
01
Physical cleaning: Use dry cloths, brushes, and other tools to directly wipe or sweep away dust on the surface to ensure cleanliness.
02
Solvent cleaning: If the surface dust is stubborn or accompanied by oil and other pollutants, appropriate solvents (such as xylene, butanone) can be used, but it should be noted that these solvents may be irritating and protective gloves and masks should be worn for cleaning.
Pour the solvent onto a clean cloth and wipe the surface to remove dust and oil stains. After cleaning, use a clean cloth to wipe away any residue and allow the surface to dry thoroughly.
03
Vacuum cleaning: For hard to reach gaps or small dust that is difficult to clean, a vacuum cleaner can be used to ensure that the dust is completely removed.
04
Pay attention to details. During the cleaning process, special attention should be paid to cleaning the dust at the interfaces and gaps, as these areas are often critical locations for applying glass adhesive. The residual dust will directly affect the bonding effect of the glass adhesive.
05
After cleaning, ensure that the surface is completely dry, as damp surfaces can affect the curing effect of the glass adhesive. You can use a hair dryer or natural air drying to dry the surface.
Through the above steps, the surface dust before the construction of glass glue can be effectively cleaned, laying a good foundation for the subsequent glass glue application work.
Through the above implementation, the problem of loose adhesion can be effectively solved, and the construction quality and efficiency can be improved. If the problem persists, it is recommended to consult professional technicians or manufacturer customer service for more specific assistance and guidance.