 Call Us +86-13902833250
News
Home » News » Precautions for Using Glass Glue in High Temperature Weather

Precautions for Using Glass Glue in High Temperature Weather

Views: 0     Author: Site Editor     Publish Time: 2024-07-19      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Glass glue is a room temperature curing adhesive that is greatly affected by the environment. The temperature keeps rising in summer, and the humidity in the air keeps increasing. The curing of sealant depends on the humidity in the air, so changes in temperature and humidity in the environment will have a significant impact on the use of products such as silicone sealant.


The high temperature in summer causes the surface temperature of the substrate to become very high during outdoor construction. When the glass glue solidifies, the temperature of the bonded material cannot exceed 50 ℃. Once the surface temperature of the substrate exceeds 50 ℃, injecting glue will cause bubbles in the adhesive joint.

微信图片_20240719151801 微信图片_20240719151804 微信图片_20240719151807


The above situation is often encountered during the construction of joint filling. When the temperature is too high, construction should be carried out in the evening or on cloudy days to avoid foaming caused by high substrate temperature.


If construction cannot be avoided under these conditions, it is recommended to conduct a small-scale adhesive test and a peel adhesion test before use to confirm good adhesion and no adverse phenomena before large-scale use. In addition, measures such as sun shading and explosion prevention can be taken appropriately during the construction process to reduce the occurrence of bubbles and bulges.


What should be paid attention to when using glass glue in hot summer? Today, the editor will share with you:


Storage precautions


01


Matters needing attention


The high temperature in summer also has certain requirements for the storage of glass glue. It is recommended to store the glass adhesive in a ventilated, dry, and cool place, avoiding direct sunlight. Meanwhile, it is important to avoid placing it near flammable materials to prevent fires.

2

Dry and sealed storage, isolate air and water, pay attention to secondary sealing of opened glue, keep the storage environment dry, and avoid water vapor infiltration that may cause silicone glue to deteriorate and affect the sealing effect.


Precautions for use environment


02


Matters needing attention


When using glass glue, attention should be paid to the usage environment. When used in high temperature environments, certain treatment is required for the glass adhesive. For example, glass glue can be left to stand in a cool place for a period of time to reduce its stickiness.

微信图片_20240626164300

At the same time, avoid operating under strong light during use to avoid affecting the viscosity of the glass adhesive.


Precautions for usage


03


Matters needing attention


When using glass glue, the correct usage method should be followed. First, apply the glass adhesive to the area to be bonded, and then wait for it to dry. Due to the high temperature in summer, the drying time of glass glue may be shortened.

微信图片_20240719151817

Therefore, after applying glass glue, it should be left for sufficient time to dry. Finally, it is important to avoid squeezing the glass adhesive before it dries to avoid affecting its effectiveness.


The high temperature weather has brought many inconveniences to various operations. In order to ensure the progress of the project, the construction and production masters are still sweating on their posts. Genesis reminds everyone to pay attention to heatstroke prevention and sun protection to ensure their own safety.


Subscribe Us

Foshan Chuang Shi Ji industrial CO., LTD. was founded in 1993, Accumulated nearly 30 years of development and technical experience.

Products

Quick Links

Contact Us

  +86-757-29203345
 +86-13902833250
No.6 Guangda Industrial Zone, Leliu Town,Shunde Area,Foshan City,Guangdong,China.

Copyright©2022 Foshan Chuang Shi Ji industrial CO., LTD.All Rights Reserved.|Support by Leadong    Sitemap